Applications

Applications

  • Open biofilter on a MBT plant for 50.000 m3/h. Eficiency outlet of 1500 OU and 1 mg/m3 of H2S
Odour Control on MBT Plants

    Turn-key odor control systems including designing and suplying of air collection piping network, scrubbing systems and organic or inorganic biofilters.

  • Removal of H2S from landfill biogas. Flow of 10.000 Nm3/h and average inlet concentration of 8.000 ppm. and outlet of 300/400 ppm. before entering cogeneration engines. Biogas Desulphuration

    Presence of H2S in biogas must be removed before send it to cogeneration engines, in order to avoid corrosion problems.

  • Lixiviate processing on manure treatment plant. Ammonia removal by stripping in closed circle and further acidic absorption. Lixiviate Stripping

    Lixiviates of such plants are usually polluted with organic or inorganic compounds such as NH3, CO2 or VOC's. These waters must be stripped before disposing them.

  • Gas Treatment on a Pharmaceutical Plant of Synthesis Reactors Events Treatment of Gaseous Efluents

    This type of industries produces different gaseous emissions due to its manufacturing processes. The collection and treatment of these gases is part of our stablished know-how and experience.

  • Plastic tanks Storage Tank Farms

    TECNIUM covers liquid storage needs with a wide range of tanks of different capacities and shapes, built up with corrosion resitant plasticsIt is also included the project needed to comply with existing regulations about chemical products storage.

  • Plastic tanks Special Equipment and Construccions

    Plastic equipments of high quality of execution. Full GRP or double wall laminates (PP, PVDF, C-PVC, PVC, E-CTFE) are usual type of constructions for such type of applications.

  • Plastic pumps for bath recirculation in a wire plant Reagent Transfer Pumps

    Handling of reagents in these industries is a critical part of manufacturing processes. TECNIUM provides solutions specifically adapted to these applications.

  • Flow: 30.000 Nm3/h ; Outlet concentration: F- < 3mg/Nm3 ; Dust: < 50 mg/Nm3 Gas Treatment on Superphosphates

    Application for washing polluted air with one or several gases with also an important contain of particles.

    The equipments used in this case are systems of venturi-cyclon in series to remove HF, SiF4 and F2

  • Instalation to treat 50.000 Nm3/h a 80ºC with outlet emissions of: NH3<10mg/Nm3; HF<5mg/Nm3; dust<10 mg/Nm3 Gas Treatment on Ammonia Fertilizers

    Application for washing polluted air with one or several gases with also an important contain of particles. The equipments used in this case are a combination of venturi-cyclon system followed with one or two stages of chemical scrubbers, used to remove dust, NH3 and HF generated in DAP, MAP and urea production

  • Multiventury System for Dust Elimination in NPK Plant in Thailand Gas Treatment on Complex Fertilizers

    Application for washing polluted air with one or several gases with also an important contain of particles.

    The equipments used in this case are multiventuris systems to remove dust and NH3 at high temperatures, generated during NPK fertilizer production.

  • Absorption 1 Odor Control Units on WWTP

    Odor control is a critical point on such type of plants. TECNIUM accounts more than 1000 references of such type of installations of big, medium and small size.

  • Reagent Storage FRP Tanks in Water Treatment Plant Storage Plastic / FRP Tanks for Chemicals

    Tecnium offers all type of plastic tanks to store the usual reagents used in this type of applications (sulfuric acid, hydrochloric acid, ferric chloride, sodium hypochlorite, sodium hydroxide, aluminium sulfate, etc). Plastic tanks made out ot FRP, PE, PP, PVC, etc.

  • Modular circular cover with wide bridge Covers for Desanders, Thickeners, ...

    Often one way to improve processes in a WWTP and minimize energy consumption is to cover some part of the plant specially the installation that produces high odor concentrations, which help as well to reduce the total flow of air to be treated in the odor control units thus reducing it size, price and cost of operation.

  • Gas intakes from sulphuric acid and caustic soda baths on aluminium extrusion and anodizing plant. Lateral collection in polypropylene with air inlet from opposite side. Gas Treatment on Metalurgical Process

    Scrubbing systems for gas treatment on installation for galvanization, anodizing, pickling, aerosols, chromates, ...

  • Vertical external plastic pump without mechanical seal in pickling line Recirculation Pumps
    Liquids usually used in surface treatments are usually recirculated to promote its effectiveness, to be filtered or to pass through heat exchangers. The corrosive nature of these fluids implies that the pumps used, must be constructed of resistant materials. Tecnium has a range of pumps especially designed for this type of recirculation.

     

  • Installation to transfer PLS from lixiviation piles to sand ponds Pumps for Copper Mines

    Pumps to handle corrosive liquides on specially hard conditions of chemical corrosion and solid abrassion. Experience and big number of world references.

  • Vertical sump cantileverd shaft pump on filtration stage drainage pit. Pumps for Uranium Mines

    Technologies to extract uranium implies the need to handle liquids which are corrosives and abrassive. Tecnium

    accounts great experience in such type of applications.

  • Gas Treatment for Absorb Ammonia with Recovery of Nitric Acid Polluted Gas Wet Absorption

    Under construction

  • Lixiviate processing on manure treatment plant. Ammonia removal by stripping in closed circle and further acidic absorption. Lixiviate Stripping on Manure Treatment Plants

    Manure treatment plants using an anaerobic process to produce methane biogas, produce liquid lixiviates with usually dissolved NH3 that has to be stripped before disposing such waters away.

  • Plastic Fans for Paper Mills Fans for ClO2

    The use of chlorine dioxide to bleach the paper pulp generes a waste gas flow that is necessary to treat before being throwed to the atmosfere. Tecnium supplies the fans to handle this type of toxic and corrosive gases.

  • Piping net on polypropylene at the entrance of biofilter Engineering

    TECNIUM is used to working with engineering companies and meet their methodologies and requirements. For this reason we can introduce ourselves not only as a supplier but as a partner for these type of customers.



Pol. Ind. Bufalvent
F. Casablanca, 24 - P.O. Box 164
08243 Manresa (Barcelona) - SPAIN

Tel. (+34) 93 874 84 80
Fax (+34) 938 757 668

Tecnium news  |  Events calendar  |  Sitemap
Privacy policy  |  Legal notice

© Copyright 2017, TECNIUM. Web design by Space Bits.